Level Infinity Airvent for High End Aesthetics and Functionality.

The crown was designed with the intent of bringing proper functionality and looks for your hardware. The circular strip-like shapes appear when it is viewed from the front which seems highly appealing. The product is capable of an easy escape of air and the bends at the top end of the walls of air-vent help in further increasing escape velocity by decreasing the pressure of hot air passing over it. Easy escape of hot air helps in increasing the life of your hardware. The Crown has a very stiff design which not only gives it a futuristic looks but also refects quality of a strong solid structure.
The center has a company logo and around it is stunning circular groovings. When viewing from sides it seems like a crown and even in isometric view it is highly appealing. The product is designed with proper research and design thinking.
To further improve its looks user can add a little-led light inside the hard but directly in front of the air vent which will add a futuristic appeal to it.

The design printability is assured by removing thin complex sections which are difficult to print because they need a complex support structure. Hence final design is an artistic product which is highly efficient in its job and can be easily printed without incorporating any complexities.

サイズ

5.5cm × 5.4cm × 2.4cm
2.17in × 2.13in × 0.96in

コメント

※コメントするにはログインする必要があります

このクリエイターの他のプロダクト

The Crown

by harshsanmotra

¥ 1,863
※税込・送料別
個数
素材
 
1
お気に入り
1814
View

このプロダクトのファン(1)

The Crown

Level Infinity Airvent for High End Aesthetics and Functionality.

The crown was designed with the intent of bringing proper functionality and looks for your hardware. The circular strip-like shapes appear when it is viewed from the front which seems highly appealing. The product is capable of an easy escape of air and the bends at the top end of the walls of air-vent help in further increasing escape velocity by decreasing the pressure of hot air passing over it. Easy escape of hot air helps in increasing the life of your hardware. The Crown has a very stiff design which not only gives it a futuristic looks but also refects quality of a strong solid structure.
The center has a company logo and around it is stunning circular groovings. When viewing from sides it seems like a crown and even in isometric view it is highly appealing. The product is designed with proper research and design thinking.
To further improve its looks user can add a little-led light inside the hard but directly in front of the air vent which will add a futuristic appeal to it.

The design printability is assured by removing thin complex sections which are difficult to print because they need a complex support structure. Hence final design is an artistic product which is highly efficient in its job and can be easily printed without incorporating any complexities.

サイズ

5.5cm×5.4cm×2.4cm

The Crown

¥ 1,863
※税込・送料別
個数
素材
 
1
お気に入り
1814
View

このプロダクトのファン(1)

コメント

※コメントするにはログインする必要があります

このクリエイターの他のプロダクト

画像 素材 価格 (JPY)
フルカラー石膏 (通常)
1,863
ポリアミド (ホワイト)
4,089
ポリアミド (ブラック)
4,637
アクリル樹脂 (半透明)
5,091
アクリル樹脂 (ホワイト)
5,104
アクリル樹脂 (ブラック)
5,104
ステンレス
8,749
ブロンズ
26,850
シルバー
28,733
チタン
43,399
ゴールド (K18)
564,199
プラチナ (Pt900)
907,360
ABS樹脂(FDM) (アイボリー)
8,977